Call 08048600366 80% Response Rate

Send Email

Waterproofing Membrane

Our product range includes a wide range of basf master seal 750 tpe (synthetic membrane of tpo), self adhesive membrane, chryso preprufe 120, dr fixit prebond (hdpe self adhesive membrane), chryso prepreufe dpc and saint gobain belt-o-band.
BASF Master Seal  750 TPE (Synthetic Membrane Of TPO)
  • BASF Master Seal  750 TPE (Synthetic Membrane Of TPO)
  • BASF Master Seal  750 TPE (Synthetic Membrane Of TPO)
  • BASF Master Seal  750 TPE (Synthetic Membrane Of TPO)

BASF Master Seal 750 TPE (Synthetic Membrane Of TPO)

Product Price: Rs 700 / Square MeterGet Best Price

Product Details:
BrandBASF
Usage/ApplicationSeal
Packaging SizeStandard
CoverageFull
ColorWhite
MaterialBASF

MasterSeal 750TPE synthetic liner of TPO modified polyolefin, in two-colour version (sand grey/black), obtained by co-extrusion, which allows it to be produced in a single layer a liner with different physical-chemical properties on the two sides. It has a polyester mesh reinforcement. 

The upper sand grey layer, which is exposed, is characterised by an extremely high resistance to weathering and ultraviolet rays, whereas the lower black layer is resistant to puncturing

MasterSeal 750TPE can be applied in the following circumstances: 

 

  • Exposed roofing laid loose
  • Exposed roofing mechanically fixed 
  • Exposed roofing fully bonded (requiring a fleece backing)
  • Landscaped areas and roof gardens 
  • May be used in underground structures and potable water structures
What are the advantages of MasterSeal 750TPE?
  • It has superior mechanical characteristics and has an extremely high resistance to weathering and ultra violet rays
  • High mechanical properties and resistance to puncturing 
  • Rot-proof
  • Resistance to root penetration
  • If double welded it allows pressure testing of joints
  • Good resistance to hydrocarbons and bacterial attack
  • Long life expectancy

Get Best QuoteRequest A Callback
Self Adhesive Membrane
  • Self Adhesive Membrane
  • Self Adhesive Membrane
  • Self Adhesive Membrane

Self Adhesive Membrane

Get Latest Price

Product Details:
Thickness2 mm
MaterialSBS polymer
BrandHyflux
Packaging TypeRoll
Length20 m

Self Adhesive Membranes are Bituminous waterproofing membrane modified with high performance SBS polymers, this will provide self-healing properties.

Get Best QuoteRequest A Callback
Chryso Preprufe 120
  • Chryso Preprufe 120
  • Chryso Preprufe 120
  • Chryso Preprufe 120
  • Chryso Preprufe 120

Chryso Preprufe 120

Get Latest Price

Product Brochure

Product Details:
MaterialHDPE
BrandSAINT GOBIAN CHRYSO
Usage/ApplicationBASEMENT WATERPROOFING
Packaging Size2.4 M X 20 M = 48 SQM
Coverage48 SQM
ColorWHITE
Thickness1.2 MM
Pre applied fully bonded HDPE membrane  

1.2 mm HDPE Membrane from Saint Gobian Chryso for  Basement Waterproofing.


■ Basements. ■ Subways, underground metro projects. ■ Retaining walls for conned area. ■ Cut and cover tunnels. ■ Caverns. ■ Other underground civil structures
Get Best QuoteRequest A Callback
Dr Fixit Prebond (HDPE Self Adhesive Membrane)
  • Dr Fixit Prebond (HDPE Self Adhesive Membrane)
  • Dr Fixit Prebond (HDPE Self Adhesive Membrane)
  • Dr Fixit Prebond (HDPE Self Adhesive Membrane)

Dr Fixit Prebond (HDPE Self Adhesive Membrane)

Get Latest Price

Product Details:
MaterialHDPE
BrandDr. Fixit
Usage/ApplicationWater proofing
Packaging Sizepacket
TypePrebond
Positive Waterproofing & Insulations Pvt. Ltd. was founded in the year 2009. We are a prominent manufacturer, trader of a wide range of Waterproofing Membrane, Geotextile Fabric, Two Component Sprayer etc.
Get Best QuoteRequest A Callback
CHRYSO PREPREUFE DPC
  • CHRYSO PREPREUFE DPC
  • CHRYSO PREPREUFE DPC
  • CHRYSO PREPREUFE DPC
  • CHRYSO PREPREUFE DPC
  • CHRYSO PREPREUFE DPC
  • CHRYSO PREPREUFE DPC

CHRYSO PREPREUFE DPC

Get Latest Price

Product Brochure

Product Details:
MaterialHDPE
Usage/ApplicationConstruction
BrandSaint Gobain Chryso
Service CityKarnataka, Kerala
Country of OriginMade in India
Saint Gobain Chryso Pre-applied Self-adhesive DPC membrane  . 

One single product for preventing rising dampness as well as preventing termites, rats and red ants from entering into the blockwork/brickwork.


CHRYSO PREPREUFE DPC is a pre-applied self-adhesive HDPE based DPC membrane manufactured with ROTERPROOF™ technology for protecting the structure from water ingress, rising dampness, termite attack, rodent and red ant attack. 

 Prevents rising dampness from entering into the building floor area, thereby protects the structure from the hollowness or debonding of tiles/granite/etc.  Prevents the growth of termites.  Prevents the attack of rats and red ants.  Fast and easy application.  Excellent Resistant to acid, alkali and aggressive ground water conditions.  Can be applied over rammed/consolidated earth. 
Get Best QuoteRequest A Callback
SAINT GOBAIN BELT-O-BAND
  • SAINT GOBAIN BELT-O-BAND
  • SAINT GOBAIN BELT-O-BAND
  • SAINT GOBAIN BELT-O-BAND

SAINT GOBAIN BELT-O-BAND

Get Latest Price

Product Brochure

Product Details:
Usage/ApplicationConstruction
BrandSaint Gobin
Packaging TypePaper
LocationBengaluru
Service CityBengaluru
UsageWaterproofing Chemical
Product Description Belt-O-Band™ is a pre-applied self-adhesive HDPE DPC strip manufactured with ROTERPROOF™ technology for plinth/belt protection.  Belt-O-Band™ is a unique HDPE DPC strip comprising of a flexible HDPE film, high bond strength adhesive which is covered by a protective release film on one side and pressure sensitive adhesive covered with a weather resistant layer on the other side.  Belt-O-Band™ meets the requirements of IS 16471:2017 as well as BS 8102:2009 and EN 13967:2012 recommendations for providing Type A protection.Features & Advantages Protects the building floor from rising dampness and leakage. Prevents the growth of termites. Prevents the attack of rats and red ants. Fast and easy application. Accommodates minor substrate/structure movements. Resistant to acid, alkali and aggressive ground water conditions.Advantages One single product for preventing rising dampness as well as preventing termites, rats and red ants from entering into the blockwork/brickwork. Dual bonding technology. Belt-O-Band™ gets bonded to the plinth beam as well to the concrete poured on top of Belt-O-Band™. Available in various sizes according to the construction requirement. Good tensile strength, elongation and puncture resistance. Very good bonding strength to surface below as well as to concrete belt.PackagingRoll size of 10m/20m length and 100mm/150mm/200mm/250mm/500mm width, available at a composite thickness of 1 mm.Uses For waterproofing the belt/plinth/foundation before brick/block work. To prevent the rising dampness through brick/block work.Method of ApplicationSurface PreparationThe membrane is unrolled and laid in fully adhered fashion on the surface to be applied on. If surface is damp, it shall be dried with hot air blower, etc. The surface shall be free from debris, loose aggregate and sharp protrusions and shall have a level, even and solid surface for application.Membrane Installation Belt-O-Band™ can be applied at temperatures of -4°C or above. During cold or damp conditions, the adhesive can be gently warmed using a hot air gun or similar to remove the moisture or condensation and improve initial adhesion.ToleranceTypically, ±10% from the above values. All parameters are obtained under controlled lab conditions.Shelf lifeThe shelf life is 12 months if stored as per the recommendations.Precautions Belt-O-Band™ membrane must be stored in a shaded area neatly covered by a thick fabric and tied securely in a manner. The membrane shall be protected from all sources of heat.PHYSICAL PROPERTIES PROPERTIES TYPICAL VALUE 0.5mm TEST METHOD Color white/redRoll size10m/20 m length x 100/150/200/250/500mm widthThickness of composite membrane ≥1 mm ASTM D 3767Tensile Strength, film (Average of both directions)≥22 MPaASTM D 412 Modified Elongation, film (Average of both directions) ≥600% ASTM D 412 ModifiedLow Temperature Flexibility-250 C PassASTM D 5636 Resistance to Hydrostatic Head ≥50 m ASTM D 5385 ModifiedPuncture Resistance≥ 600 NASTM E 154
Get Best QuoteRequest A Callback
Dr. Fixit Torchshield AM 3160/4160
  • Dr. Fixit Torchshield AM 3160/4160
  • Dr. Fixit Torchshield AM 3160/4160
  • Dr. Fixit Torchshield AM 3160/4160

Dr. Fixit Torchshield AM 3160/4160

Get Latest Price

Product Details:
Roll Size1 x 10 Mtr
Usage/ApplicationExterior
BrandDr. Fixit
Packaging Sizestandard
Packaging Typestandard
Service LocationLocal
Country of OriginMade in India
APP MODIFIED BITUMEN BASED MINERAL FINISHED MEMBRANES FOR WATERPROOFINGSpecification/Additional Details
  • Roll Size1 x 10 Mtr
  • Usage/ApplicationExterior
  • BrandDr. Fixit
  • Packaging Sizestandard
  • Packaging Typestandard
  • Service LocationLocal
Get Best QuoteRequest A Callback
SAINT GOBAIN PLINTH-O-BAND
  • SAINT GOBAIN PLINTH-O-BAND
  • SAINT GOBAIN PLINTH-O-BAND
  • SAINT GOBAIN PLINTH-O-BAND

SAINT GOBAIN PLINTH-O-BAND

Get Latest Price

Product Details:
MaterialHDPE
Usage/ApplicationConstruction
BrandSaint Gobin
LocationBengaluru
Service CityBengaluru
Plinth-O-Band is a pre-applied self-adhesive HDPE DPC strip manufactured with ROTERPROOF™ technology for plinth/belt protection. Plinth-O-Band is a unique HDPE DPC strip comprising of a flexible HDPE film, high bond strength adhesive which is covered by a protective release film on one side and pressure sensitive adhesive covered with a weather resistant layer on the other side.  Plinth-O-Band meets the requirements of IS 16471:2017 as well as BS 8102:2009 and EN 13967:2012 recommendations for providing Type A protection.Features & Advantages Protects the building floor from rising dampness and leakage. To prevent the growth of termites. To prevent attack from rats and red ants. Fast and easy application Accommodates minor substrate/structure movements. Resistant to acid, alkali and aggressive ground water conditions.Advantages One single product for preventing rising dampness as well as preventing termites, rats and red ants from entering into the blockwork/brickwork. Dual bonding technology. Plinth-O-Band gets bonded to the plinth beam as well to the concrete poured on top of Plinth-O-Band. Available in various sizes according to the construction requirement. Good tensile strength, elongation and puncture resistance. Very good bonding strength to surface below as well as to concrete belt.PackagingRoll size of 10m/20m length and 100mm/150mm/200mm/250mm/500mm width, available at a composite thickness of 1 mm.Uses For waterproofing the plinth/foundation before brick work. To prevent the rising dampness through brick work.1Method of ApplicationSurface PreparationThe membrane is unrolled and laid in fully adhered fashion on the surface to be applied on. If surface is damp, it shall be dried with hot air blower, etc. The surface shall be free from debris, loose aggregate and sharp protrusions and shall have a level, even and solid surface for application.Membrane InstallationPlinth-O-Band can be applied at temperatures of -4°C or above. During cold or damp conditions, the adhesive can be gently warmed using a hot air gun or similar to remove the moisture or condensation and improve initial adhesionPHYSICAL PROPERTIES PROPERTIES TYPICAL VALUE 0.5mm TEST METHOD Color white/redRoll size10m/20 m length x 100/150/200/250/500mm widthThickness of composite membrane ≥1 mm ASTM D 3767Tensile Strength, film (Average of both directions)≥22 MPaASTM D 412 Modified Elongation, film (Average of both directions) ≥600% ASTM D 412 ModifiedLow Temperature Flexibility-250 C PassASTM D 5636 Resistance to Hydrostatic Head ≥50 m ASTM D 5385 ModifiedPuncture Resistance≥ 600 NASTM E 154ToleranceTypically, ±10% from the above values. All parameters are obtained under controlled lab conditions.Shelf lifeThe shelf life is 12 months if stored as per the recommendations.PrecautionsBelt-O-Band™ membrane must be stored in a shaded area neatly covered by a thick fabric and tied securely in a manner. The membrane shall be protected from all sources of heat.
Get Best QuoteRequest A Callback
CHRYSO SELFSEAL 500 (1.2 M x 10M)
  • CHRYSO SELFSEAL 500 (1.2 M x 10M)
  • CHRYSO SELFSEAL 500 (1.2 M x 10M)
  • CHRYSO SELFSEAL 500 (1.2 M x 10M)
  • CHRYSO SELFSEAL 500 (1.2 M x 10M)
  • CHRYSO SELFSEAL 500 (1.2 M x 10M)

CHRYSO SELFSEAL 500 (1.2 M x 10M)

Get Latest Price

Product Brochure

Product Details:
BrandSaint Gobain
TypeSelf addhesive
Colorwhite
LocationBengaluru
Positive Waterproofing & Insulations Pvt. Ltd. was founded in the year 2009. We are a prominent manufacturer, trader of a wide range of Waterproofing Membrane, Geotextile Fabric, Two Component Sprayer etc.
Get Best QuoteRequest A Callback
SBS Membrane
  • SBS Membrane
  • SBS Membrane
  • SBS Membrane

SBS Membrane

Get Latest Price

Product Details:
Usage/ApplicationWaterproofing
MaterialSBS
Thickness2 mm
Packaging TypeRoll
Length10-20 m
In the span of 12 years, Positive has completed several end to end waterproofing projects, large medium small. Our clientel includes Brigade, Bagmane, JMC, NCCCL, HMT.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Positive Waterproofing & Insulations Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.