Waterproofing Coating Material

Approx. Rs 178.75 / KgGet Latest Price

Product Details:

DESCRIPTION: CICO TAPECRETE P-151, popularly known as TAPECRETE is an acrylic based Polymer Modified Cementitious Flexible Composite coating system. CICO TAPECRETE P-151 in conjunction with cement provides properties to combat the shortcomings of plain cement, particularly its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. CICO TAPECRETE P-151 polymer adds to the potential use as well as enhances the properties of cement slurry/ mortar/concrete making them excellent choice for use in new as well as renovation work.

USES: CICO TAPECRETE P-151 is used for surface treatment, protecting, waterproofing and repairing concrete  and  masonry. Waterproofing of basements, toilets, terraces, roofs, swimming pools, water towers etc. General concrete repairs. Protection of concrete against corrosion, salt attack etc. 

FEATURES: ??? Combines a tough, flexible, hard-wearing surface with waterproofing. ??? Allows trapped vapour to escape thus preventing peeling and blistering. ??? Can be applied in uniform thickness to horizontal and vertical surfaces. ??? Develops excellent bond to most building materials. ??? Reduces or prevents salt penetration into concrete.??? Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies. ??? Is highly durable in continuous wet condition. ??? Is non-flammable and does not give off toxic gases, when exposed to fire. ??? Will not rot or corrode. ??? Most properties improve with age. ??? Is not harmful to the health of workman.

APPLICATION:- CICO TAPECRETE P-151 polymer is mixed with neat fresh cement in the ratio of 1:2 by weight. The mix has to be stirred thoroughly until smooth homogeneous slurry is obtained. Wait for 5-10 minutes to release entrapped air bubbles. Any lump found in the mix should be removed or mixed thoroughly. The mix has to be applied by brush on rendered and/or prepared surface. Two or more coats are recommended. First coat should be allowed to air dry for 5-6 hours prior to apply subsequent coat. 

CURING: After application of final coat of CICO TAPECRETE P-151, initial air drying shall be done for 2-6 hours. During this period no water is to be used for curing. In case of high temperature and low humidity combined with high wind condition, the coating shall be covered with polythene sheet to avoid rapid drying of the coating. After maximum period of 6 hours after the final application, moist curing shall be done for the next 24 hours by spraying/sprinkling of potable water on CICO TAPECRETE P-151 COATING. During this period at no point of time should the CICO TAPECRETE P-151 coating be left completely dry or submerged in water. Following moist curing, the CICO TAPECRETE P-151 coating shall be allowed to air dry for 2 days before submersion in water.
 
PRECAUTIONS ??? CICO TAPECRETE P-151 system must be applied with temperature above 10??? C and below 40??? C. ??? CICO TAPECRETE P-151 should not be used without addition of cement.

STORAGE: Store in dry cool place in the temperature range from 5???C to 30???C in sealed condition. Do not allow to freeze. Keep away from direct sunlight.

Approx. Rs 265 / KgGet Latest Price

Product Details:

Description

• It is a scientific blend of synthetic resins, selected minerals and fillers modified with polyurethane.
• It is a protective and waterproof coating.
• It is a high performance coating that dries to elastic, flexible, impermeable waterproof membrane.
• Easy and direct (cold applied) application, no preheating required.
• Provides an impervious waterproofing membrane that protects concrete structure and brick foundations against chloride and sulphate ions present in soils and water.
• Corrosion resistant and vapor barrier.

Advantages:

• Easy and direct (cold applied) application, no pre heating required.
• Seamless, no joint.
• Provides an impervious waterproofing membrane that protects concrete structure and brick foundations against chloride and sulphate ions present in soils and water.
• Corrosion resistant and vapor barrier.

Recommended Uses:

• Useful as protective coating on concrete  nd brick foundations, retaining walls, timber, metals, etc.
• Provides a sandwich membrane in new construction and surface treatment on existing slabs.
• Damp-proofing of regular surfaces like concrete and asbestos.
• Provides a key for plaster on difficult surfaces.
• For waterproofing and protection of structure, concrete, columns and beam.

Product Price :Get Latest Price

Product Details:

DESCRIPTION: Bostik Elastocoat is a high performance Elastomeric acrylic based water proofing coating with antifungal and crack bridging ability. Recommended for protection of exterior cementitious surfaces  AREAS OF APPLICATION:
It is an ideal material recommended for   
RCC Structure, Masonry Walls,Sloping /Flat Roofs,Cooling Tower, Bridges.

ADVANTAGES: Waterborne product  , Eco-friendly  Single component , ease of application  Tint able white base Excellent antifungal & antibacterial properties  Low water absorption Seamless membrane with good breath ability  Reliable crack bridging Low dirt pick up Long term exterior durability UV stable.

COVERAGE: Bostik Sealer coat  :12 sq.m /ltr/coat
Bostik Elastocoat :3.5 sq.m /ltr/2coat 

STORAGE & SHELF LIFE:  Elastocoat  as supplied shall be stored  in a cool and dry place away from sunlight, moisture and high humidity and have a shelf life of 12 Months in the original sealed packing.

WARRANTY: Whilst Bositk India Pvt Ltd., strives to ensure that any advice, information or recommendation given are appropriate and correct, it cannot accept any liability directly or indirectly arising out of the use of the product, since the method and place of application of the products are beyond their control. Its guarantee is therefore limited to  the quality of materials delivered.

HEALTH & SAFETY: Elastocoat is water borne paint & eco-friendly. It is not health hazardous. 

PACKING   Bostik Sealer coat   :1& 5 Ltrs Bostik
Elastocoat   :5&20 Ltrs.