Product Price :Get Latest Price
Product BrochureProduct Details:Brand | BASF MasterSeal NP |
Form | Liquid |
Packaging Size | 310 ml cartridges and 600 ml sausages |
Shore A Hardness | (ISO 868) 15-20 |
Movement Accommodation Factor | +-25% |
Skin Formation Time | 120 mins(23 Deg C,50% RH) |
Temperature of Application | +5 Deg C to +40 Deg C |
Specific Gravity | 1.2 g/cm3 |
Service Temperature | -30 Deg C to +70 Deg C |
MasterSeal NP 472 is a high performance one component, moisture curing, polyurethane construction sealant. In properly designed and constructed joints the product has been formulated to offer a non-slump elastomeric seal, which exhibits good skin formation time and a fast cure.
MasterSeal NP 472 has been developed specifically for sealing dynamically moving joints such as expansion and control joints. MasterSeal NP 472 demonstrates high elasticity and recovery properties and therefore may be used to bond and seal most common building materials including concrete, glass, wood, stone, metal and anodized aluminum. In addition, MasterSeal NP 472 has excellent tear resistance and good weathering characteristics.
Additional Information:
Product Price :Get Latest Price
Product BrochureProduct Details:Type | Latex Based |
Form | Liquid |
Brand | BASF MasterEmaco |
pH Value | 8 +- 1 |
Aspect | Milky-white,StyreneButadiene co-polymer latex |
Relative Density | 1.02+- 0.01 at 25 Deg C |
Solid Content | 37+-1% |
MasterEmaco SBR 2 is a milky-white, Styrene-Butadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive properties. When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix.
Recommended Uses:
Additional Information:
Product Price :Get Latest Price
Product BrochureProduct Details:Usage/Application | Epoxy bonding |
Form | Liquid |
Packaging Type | Tin Container |
Tensile Strength | 25 MPa @ 7 days @ 23 Degree C |
Compressive Strength | 65 MPa @ 7 days @ 23 Degree C |
Brand | BASF MasterBrace |
Setting Time | 150 minutes @ 25 Degree C |
Priming | Coverage 2-2.7 m2/litre depending on profile of concrete |
MasterBrace 1414 is a solvent free, high performance, long potlife, versatile epoxy bonding agent. MasterBrace 1414 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation
Recommended Uses:
MasterBrace 1414 has long potlife which helps in achieving effective bond between old and new concrete even if application of repair mortars is delayed.
Additional Information:
Product Price :Get Latest Price
Product BrochureProduct Details:Usage/Application | Concrete repair |
Brand | BASF MasterEmaco |
Packaging Type | Sack |
Density | Approx. 2250 kg/m3 |
Appearance | Grey powder |
Water Powder Ratio | 0.15 - 0.16 |
Mixing Water per 25 kg bag | Approx.3.75- 4.25 litres |
MasterEmaco S 348 trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs.
MasterEmaco S 348 is suitable for placing in thicknesses of 12 mm to 50 mm both vertically and overhead.
MasterEmaco S 348 provides a durable, strong structural repair fully compatible with host concrete.
Recommended Uses:
MasterEmaco S 348 is the ideal material for vertical or horizontal structural repairs where the thickness of repair is more than 10- 12mm and use of hand or machine applied structural repair systems is required. Typical applications are:
Dual Shrinkage characteristics of MasterEmaco S 348 enhances bonding characteristics and reduces cost of application by enabling easy application in higher thicknesses without sag.
Additional Information:
Product Price :Get Latest Price
Product BrochureProduct Details:Recoat Time | 8 hours @ 25 Deg C 6 hours @ 40 Deg C |
Bond Strength | >2. MPa (concrete failure) |
Setting Time | 12 hours @ 25 Deg C |
Mix Ratio | 6238 pbw |
Application Temperature | 20 Deg C - 40 Deg C |
Supply Form | Viscous Paste |
Brand | BASF MasterBrace ADH |
MasterBrace ADH 2200 is a solvent free, high performance, non-slumping epoxy mortar and adhesive. MasterBrace ADH 2200can be used as a bedding mortar, thixotropic adhesive and non-sag concrete repair mortar
Recommended uses:
MasterBrace ADH 2200 is a thixotropic adhesive which with its non-sag characteristic helps in easy levelling of un even concrete surface.
Additional Information:
Product Price :Get Latest Price
Product BrochureProduct Details:Packaging Size | 20 x 10mm (+- 5%) 30 linear metres per carton. |
Application Temperature | -30 DegreeC to +50 DegreeC |
Brand | BASF MasterSeal |
Packing | 20 x 10 mm (+- 5%) 30 linear metres per carton |
Basis | Polymer composite |
Application Temperatures | -30 Deg C to +50 Deg C |
Freeze or Thaw Resistance | No influence before and after concreting |
MasterSeal 910- Water swelling waterbar for joints
How does MasterSeal 910AP work?
When in contact with water the MasterSeal 910AP Waterbars will slowly increase in volume (swell) without changing the homogeneous structure of the polymer matrix. The increase in volume by the swelling action can be up to 200% (depending on type of water). The pressure of the swelling action will cause the MasterSeal 910 Waterbar to profile itself exactly into the joint filling all cavities and effectively stopping water seepage, even at high external water pressure.
The MasterSeal 910 Waterbars will not transport water through their polymer matrix and thus not act as a capillary duct. The swelling action is limited to the sides exposed to water.
Recommended uses:
MasterSeal 910 Waterbar is suitable for all construction joints subject to hydrostatic pressure, on one or both sides. MasterSeal910 provide simple but efficient waterproofing of construction joints.
What makes MasterSeal 910 a unique solution?
MasterSeal 910 is a hydro-swelling waterbar, ready for installation in construction joints to render the joints leak proof. It is based on specially designed polymer composite that acts by undergoing reversible swelling on exposure to water to form an effective seal.
What are the features and benefits of MasterSeal 910?
MasterSeal 910 is based on a newly developed polymer technology providing flexible polymer composites which have high chemical resistance capable of storing water in their molecular structure by increasing their volume.
MasterSeal 910 provides simple but efficient waterproofing of construction joints. Movements in the joint, e.g. by shrinkage or settlement in the substrate, are taken up by the elastic profile of the MasterSeal 910 Waterbar. MasterSeal 910 has been successfully employed to waterproof joints where an opening of up to 5mm was deliberately created. Water pressure of up to 5 bar was sealed.
swellable water stopper
Additional Information:
Product Price :Get Latest Price
Product Details:Usage/Application | Construction |
Packaging Size | 1 litre,5 litre,20 litre& 235 kl |
Packaging Type | Plastic Container or Drum |
Brand | BASF Masterpel |
Ph Value | >-6 |
Specific Gravity | 1.065 +- 0.02 at 25 Deg C |
Aspect | Dark Brown liquid |
Chloride Ion Content | <0.2% |
MasterPel 777 is an innovative liquid admixture designed specifically to allow superior workability in concrete / mortar mixes with reduced water and also achieve high resistance to water ingress. It is based on a specially formulated polymers and compatible with all types of cement and binders (like fly ash, ground granulated slag, silica fume, metakaolin, etc).
Recommended Uses:
MasterPel 777 can be used in all types of concrete and mortar that is used in all types of residential, commercial and infrastructural construction. Additionally, it can be used in concrete applications constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures.
MasterPel 777 is used as a dual action admixture combining both the waterproofing cum plasticizing effect for cement concrete, mortars and plasters.
Additional Information:
Product Price :Get Latest Price
Product Details:Packaging Size | 20kg |
Type | masterseal |
Color | White Crystal |
Category | Acrylic Based Polymer Coating |
Form Of Chemical | Liquid |
Country of Origin | Made in India |
MasterSeal 550 is ideal:
Product Price :Get Latest Price
Product Details:Brand | Basf |
Country of Origin | Made in India |
Product Price :Get Latest Price
Product Details:Brand | BASF |
Country of Origin | Made in India |
Product Price :Get Latest Price
Product Details:Brand | BASF |
Country of Origin | Made in India |
Product Price :Get Latest Price
Product Details:Brand | BASF |
Packaging Size | 50 Kg |
Packaging Type | Bag |
Surface Of Application | Plastic |
Material Compatibility | Plastic |
Chemical Resistance | Automotive Fluids |
MasterTile 25 is a grey cementitious powder containing performance enhancing polymers and other specialty additives. This versatile, easy-to handle,cement-based adhesive is perfect for fixing ceramic tiles, quarry tiles and similar materials. It provides strong adhesion to cement/sand screeds,to in-situ/pre-cast and aerated concrete, and brickwork. For external wall application use MasterTile 30
Recommended uses:
Explore More Products
© Positive Waterproofing & Insulations Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited